With that in mind one obviously needs to take proper care of his or her computer. Doing so means applying security and driver updates. But at the same time there’s also the issue that applying an update can pose potential dangers to a computer. However, this is only the case if one doesn’t follow proper update procedures. There’s a few simple rules which can ensure updates go smoothly.

The first and often most essential point is to double check one’s hardware against the driver which will be installed. This might sound like common sense at first. But one should keep in mind just how often terms and brands are reused within the industry. It’s not at all common for brands to have entirely different chipsets in devices with the same name. Likewise, driver installation programs often skip any type of hardware verification. If one does install the incorrect drivers then it might well put a computer entirely out of commission.

Next, one should check the stability and health of one’s hard drive. This step touches on the way in which information is stored in a computer. Analog based information, such as a record or cassette tape, allows for imperfect transfers. But digital information doesn’t have any real error correction. One can think of it as a mathematical equation. Data on a hard drive is basically just a series of ones and zeroes. But bad sectors on a hard drive can keep those numbers from being properly written. If one runs a file checker on the hard drive it can detect those bad sectors. This ensures that when the driver installs, it’s being properly written onto the drive.

One should then disconnect any unnecessary devices from the computer. For example, unless one is updating a scanner’s drivers it shouldn’t be plugged in. External hardware has a strong tendency to lock up resources when in use. And it’s possible that they’ll end up protecting files which need updating during driver installation.

Antivirus utilities should also be disabled when installing or updating drivers. Computer drivers essentially sit between the operating system and the underlying hardware. An antivirus tries to keep programs from usurping control of an operating system. In some ways a driver does work with similar permissions and targets as a virus. Of course drivers aren’t malicious and work with the computer’s owner. But an antivirus program won’t always be able to figure that out. As such it’s best to disable those programs before updating a computer driver.

Before updating a computer driver one should also update the operating system itself. This is in large part because drivers serve to facilitate communication between different components. The drivers might be said to expect a certain language from the operating system to translate to the hardware. But if an operating system hasn’t been updated then it might not properly comprehend what a system is reporting.

Finally, one should back up any important files. At this point the chance of a driver update going wrong is extremely low. However, backing up important files ensures that even a worst case scenario won’t be that bad.

The post Preparations You Should Make Before Updating A Computer Driver appeared first on I Can Has Force.

For one thing, how about we talk about the link itself. You need to locate a link that is very much protected. Protecting will anticipate the loss of top of the line and will counteract radio recurrence [RF] impedance. Any individual who has utilized an unshielded link has no uncertainty been tormented by humming, murmuring and the irregular radio station getting through their amp. Highs are regularly weakened or moved off. You additionally need a link that is adaptable and supple. When putting away your link, consistently curl it in loosened up circles. Try not to curve or wrap it firmly. This will pressure the wire and cause cracks in the strands that will debase the links execution. On the off chance that your links external packaging is an elastic compound, at that point clean your links intermittently with a sodden towel. Try not to utilize any substance cleaners or de-greasers as these will fall apart the external covering and in the long run ruin your link. On the off chance that your external packaging is fabric, at that point you are stuck between a rock and a hard place in the “cleaning” division. There is no genuine method to clean the fabric packaging without utilizing synthetic that can harm the packaging or the elastic sleeve underneath.

Shouldn’t something be said about Coiled Cables? I realized you would ask that! As a matter of fact I realized I would approach that for you. My genuine belief is basic. Never use them! The greater part of the curled links I have seen, utilized or tried have been ineffectively produced. Regardless of whether the quality is normal, the weight of the curl pulling back on the associations is more noteworthy than you might suspect. The heaviness of the link in that curl is disseminated so all the pressure is on the association between the link and the fittings on each end. Your odds for stress disappointment are incredible and the general nature of specialist and execution is low. Not an incredible worth, even at scratch and dent section costs.

The subsequent point to consider are the attachment parts of the bargains. The closures are commonly ¼” banana plugs, except if you have a custom connector set introduced on your amp, guitar or both. There are two famous styles of ¼” banana plugs, the straight plug and the 90 degree plug. A few guitarists lean toward the 90 degree plug on the guitar part of the bargain when the container is situated on the facade of the guitar. On the off chance that the container is situated on the back edge of the body, at that point the straight attachment is generally liked. The end that fittings into the amp is generally a straight connector.

The fitting lodging can be comprised of Plastic, Rubber or Metal. Plastic is normally utilized on low quality links and ought not be considered in any genuine decision for links. Metal lodgings are the hardest and can withstand the maltreatment that artists will in general perpetrate. They are likewise the most effortless to fix, on the off chance that you are the sort of artist who appreciates working with your hands and are convenient with a fastening iron. The last sort is the formed, rubber treated style. These can’t be fixed without totally supplanting the end, however a decent quality formed end will have strain alleviation characteristics and should hold up well with ordinary use.

So to what extent will a link last? That relies upon the utilization and care you give your links. One thing is ensured however; ALL links will in the long run turn sour for some explanation and you have the decision of either acquiring new links or purchasing links with a Lifetime Warranty in any case. It’s hard to believe, but it’s true; there are organizations out there who remain behind their item with a full substitution lifetime guarantee. That implies that in the event that anything happens to your link, you should simply take it once more into the seller that offered it to you and you get a substitution at that moment! Not all guarantees are full substitution. It is essential to peruse the guarantee and comprehend what is secured. Two makers that ring a bell who offer full substitution are Mogami and Monster, yet there are increasingly out there and you should do some examination. The other factor for advantageous full substitution is to purchase your links from a seller close to you who conveys your link image as typical stock. On the off chance that you purchase your links from an online source, you might need to pick one that additionally has block and mortar customer facing facades, similar to Guitar Center, so you don’t need to mail your links in and hang tight for your substitution.

Despite the fact that all “new” link finishes will direct and pass the sign with little opposition, nickel plated attachments will in general oxidize after some time and lose conductivity. A superior choice for the whole deal is a gold plated plug. This will help with sign stream, yet recollect that the female finishes in your guitar and your amp are still nickel plated. There are ¼” cleaners that you can purchase to keep the female repositories clean or you can utilize contact cleaner on a Q-Tip or wipe tip wand to clean the contacts inside your guitar and amp occasionally.

Third, link length is additionally significant. As a standard guideline, never surpass 25 feet for a solitary link or as a complete keep running of links that might be daisy affixed from your guitar, through your belongings and into your amp. This length impediment will downplay misfortune will in any case take into consideration opportunity of development on generally organizes.

What’s more, last, yet not least… “The Test Drive”. Snatch your guitar and, if conceivable, your amp and head over to your vendor and attempt each link, individually, one next to the other, under similar conditions and settings. When you have limited the decisions to 2 or 3, at that point factor in the expense and settle on an educated choice for you and your music.

The post Does It Really Make a difference What Guitar Cable I Use? appeared first on I Can Has Force.

While there are so much fun and a variety of activities in which we can indulge, there is a huge risk attached too. The risk is present in the form of a virus. A virus is a program that can produce so much danger to our computer. If such a program somehow gets into our computers, our important files will get destroyed.

Important information can get leaked

Our important information will get leaked and will reach to the people who can be dangerous and threatening. So, it is important that we protect our computer in the best manner. It is our job and our responsibility to fulfill. If we fail at it, we can imagine the harsh consequences.

You can Buy a virus scanner [ซื้อ โปรแกรม สแกน ไวรัส, which is the term in Thai] in order to scan your compute on daia ly, weekly or monthly basis. Even if you forget to run the software, it will automatically start the program because it is built to work like that. So, you would not have to worry about anything as the software can be manually managed as well as automatically. This kind of facility is available with Panda Antivirus program.

A capable antivirus will scan as well as remove the threat

So, do the most important thing you can and install a capable antivirus program. A capable antivirus program will protect your computer in real-time. Apart from that, most of the software also check the computer and scan it for any potential virus. A timely check proves to be good for the health of our computer.

Buy a high-end antivirus software now

You can buy an antivirus program, and with that, you can get the scanner free most of the times. Do check out the Panda Antivirus program that is highly reliable and the best option to get nowadays. It is also cheap and consists of all the facilities that you would get on any high-end antivirus program present in the market.

The post When we connect to the internet, there is a high chance of getting your computer infected appeared first on I Can Has Force.

In the meantime, websites work in a more window-like manner, as they are not renovated so often. In addition, especially in the case of business websites, the site mainly serves to bring essential information – such as prices, products and contact channels.

Social networks serve to relate in real time with the public and can help to virtualizer the brand. Read more…

Domain and Hosting

There are several hosting plans, and the 3 most common types are:

• shared hosting;
• dedicated hosting;
• and hosting in the cloud.

The difference between shared hosting and dedicated hosting is that at the 1st, despite paying a more affordable amount, you will split the server’s available space with other sites – which reduces performance. Meanwhile, the 2nd ensures that each site has its own server.

In cloud hosting, in turn, your site does not stay on a physical machine, with its own processor and memory. Instead, the cloud becomes a network of machines that share those resources with each other.

By choosing this mode, your site will be on that network machines, in part isolated and dedicated only to him.

The main advantage is that, because it is not a physical machine, your site is not subject to hardware defects. Also, once hosted in the cloud, it’s easier to increase your site’s ability to receive visitors, since hiring additional features is simple.

Choose a Site Builder

Remember what we said, you do not need deep programming or design knowledge to create a website?

The reason is that today there are site builders. They bring ready-made themes and extra features, which you can combine and customize to create something with the face of your brand.

The most commonly used website builder is WordPress.org. Be careful not to confuse it with WordPress.com which, while being a little easier to use, is much more limited in terms of options and autonomy. WordPress with which, although it is a little easier to use, it is much more limited in terms of options and autonomy.

Define Your Goal

Let’s put aside the more technical part of your site. List the Sections of Your Site

Most sites end up containing the most common sections:

• home page, with a good opening image or a carousel of striking images and phrases;
• who we are, telling a little of the story and sometimes the work team;
• products or services, with a list of what the company offers;
• clients, generally highlighting the largest and best known;
• portfolio or key cases of success as a way to demonstrate that the company is reliable and delivers what it promises;
• contact via a form, in addition to addresses and telephone numbers.
• The reason for the sites being formed by these pages is one: it usually works.
• More than that: to define what the contents of each page will be.

Choose a Theme

Going back to the settings …

To use WordPress, you need a good theme. And, now that the purpose of your website and the pages that will be contained in it are clearer, it will be easy to choose a striking visual.

The post Steps to Creating a Good Website appeared first on I Can Has Force.